2N Indoor View - Technical Parameters; Power, Audio, and Video Specs

2N® Indoor View User Manual
125 / 132
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7. Technical Parameters
Power Supply
Type:12 V DC +/−10 % adapter or PoE 802.3af
Recommended power supply:12 V / 1 A
Polarity reversal protection:yes
Power Consumption
In idle:
12 V: 2,28 W – 0,19 A
PoE: 2,9 W
User Interface
Controls:capacitive touch panel
Display:7''with 1024 x 600 pixel resolution
Service:RESET button with long press option for factory reset
Signalling protocol
SIP (UDP, TCP, TLS)
Audio
Microphone: integrated
Speaker:2 W integrated
Induction loop output:600 mV RMS
Audio stream
Protocols: RTP, RTSP
Codecs:G.711, G.729, G.722, L16/16kHz
Video stream
Protocols: RTP, RTSP, HTTP, MJPEG
Codecs: H.264, MJPEG
Video resolution: 1280 x 720 px
Frame rate: up to 30 fps
Interface
LAN:10/100BaseT, RJ-45; Cat5e or higher
Doorbell Input
Input type: switching contact (button/relay)
Contact type: normally open (NO)
Contact parameters: up to 50 V / 5 mA, DC
Mechanical Parameters
Dimensions (w x h x d):193x 157 x 50mm