2. 2N® IP Automation
Configuration
2N IP intercoms provide flexible setting options depending on the user's requirements.
If the standard setting options (switch/call settings, e.g.) are insufficient for the
intended use, apply a special programmable interface – . Typically, Automation
is helpful for applications that require rather complex interconnection Automation
with the third parties' systems.
Note
Automation works only with a valid or Enhanced Integration Gold
licence key.
Some intercom models are equipped with a number of digital inputs and 2N IP
outputs, most of which can be configured like standard intercom switches (refer 2N IP
to the Switches subsection). You can make use of all of these inputs and Automation
outputs in variable combinations.
Automation helps you combine the arising in the system (such as key pressing, Events
RFID card use, digital input status change, etc.) with specific s (such as digital Action
output activation, user sound playing, call, etc.) as necessary. Moreover, the execution
of actions can be bound by selected s (time profile state, logic input state, e.Condition
g.).
To Next Page
Loading...
Need help?
General
