2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 99/104
8. Examples of Use
Calling to Dispatching Office in Case of Unauthorised Door Opening
Specification
Call the selected telephone number whenever the tamper switch gets disconnected
(device opened).e
Block diagram
The rising edge on the tamper input (1: Event.InputChanged) initiates calling to the
defined telephone number (2: Action.BeginCall).
Intercom settings
1: Event.InputChanged: Input=tamper
2: Action.BeginCall: Number=1111; Event=1

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple