2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 8/104
Automation Control
– intercom allows up to 30 blocks at 5 independent Bookmark Function 2N IP
pages to be created and interconnected (regardless of the block type – events,
actions and conditions). Multiple actions can be assigned to an event or
condition. Thus, you can create 15 actions and assign them to 15 events or create
29 actions and assign them to 1 event, for example.
– function enableEnabled
– function nameName
– function state: Started/Stopped/Empty/ErrorState
– click to set the function and to delete the function.Action

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple