2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 48/104
AnswerCall
The block defines the action necessary for answering of an incoming call. AnswerCall
In case no call is coming or the incoming call is not ringing, the action will not initiate
any activity.
Parameters
– define the event to launch the action.Event
– define the condition to be met to execute the action. This parameter Condition
is optional.
Example
Answer a call if the event defined on row 2 arises:

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple