BeginCall
The block defines the action necessary for establishing of an outgoing call BeginCall
to the defined telephone number, SIP URI or user number included in the intercom
phone book.
Parameters
– define the event to launch the action.Event
– define the condition to be met to execute the action. This parameter Condition
is optional.
– define the phone number to be called (if intercom is registered Number 2N IP
to the PBX).
– define the SIP URI to be called: sip:user@domain.Uri
– define the phone book number to be called. The valid values are 1 through User
999 (depending on the intercom model).
– define the application to be called: device_name.Device 2N IP Mobile
®
Enter just one of the above mentioned parameters ( , , orNumber Uri User Device
).
Example
Establish an outgoing call if the event defined on row 2 arises:
To Next Page
Loading...
