2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 77/104
ProfileState
The block defines the condition to be met in the case of active/inactive ProfileState
time profile.
Input parameters
– define the time profile number (1–20 depending on the intercom Profile
model).
– define the required profile state. This parameter is optional.State
Valid values:
– active profile (default value)active
– inactive profile.inactive
Output parameters
O u t
Example
The condition is met for inactive time profile 1:

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple