Formatter
The block helps you use output parameters from Events in Actions and Formatter
format access to the Actions parameters.
Parameters
– define the text to be sent to the output of the Text variable. Use braces Format
{} to enter the Param1 value.
Example of use
} (Param1 text value)http://1.1.1.1./key={1
– set an output parameter for the Format parameter. Typically, it is Param 1
connected to the Events variable.
Param 2 – set an output parameter for the Format parameter. Typically, it is
connected to the Events variable.
– set an output parameter for the Format parameter. Typically, it is Param 3
connected to the Events variable.
– set an output parameter for the Format parameter. Typically, it is Param 4
connected to the Events variable.
– set an output parameter for the Format parameter. Typically, it is Param 5
connected to the Events variable.
Output parameters
– final Format text with the set output parameters if any. In Param 1.Text
To Next Page
Loading...
Need help?
General
