2N IP Solo - Mechanical Properties

Installation manual 2N® IP Solo
66 / 74
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Mechanical properties
Cover:robust zinc casting with surface finish(minor surface shade nuances are
acceptable)
91550XX – NICKEL
Material - Zamak 410 - Zn95Al4Cu1
Surface treatment - Zn/Cu20/Ni25b max. 80 µm
91550XXB – BLACK 
Material - Zamak 410 - Zn95Al4Cu1
Surface treatment–PUR Wet coating 15-25 µm, RAL 9005 Jet black
interior side - passivated zinc
Working temperature:-40 °C – 60 °C
Working relative humidity:10 % – 95 % (non-condensing)
Storing temperature:-40 °C – 70 °C
Dimensions
Surface mounting frame:
107 (W) x 130 (H) x 28(D)mm
4.21 (W) x 5.12 (H) x 1.10 (D) inches
Flush mounting frame:
130 (W) x 153 (H) x 5(D)mm
5.12 (W) x 6.02 (H) x 0.20 (D) inches
Flush mounting box (minimum hole dimensions):
108 (W) x 131 (H) x 45 (D) mm
4.25 (W) x 5.16 (H) x 1.77 (D) inches
Module internal cutout:72 (W) x 89,3 (H) mm / 2.83 (W) x 3.51 (H) inches
Weight:max net weight: 1 kg
Covering level:IP54
Resistance level:IK08