2N IP Solo - Description and Installation Overview; Before You Start; Installation Types; Mechanical Installation

Installation manual 2N® IP Solo
26 / 74
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2. Description and Installation
Here is what you can find in this section:
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Extending Module Connection
2.5 Completion
2.1 Before You Start
Product Completeness Check
Before you start please checkwhether the contents of the package of your new2N
®
IP
Solocomplies with the following list.
1x2N
®
IP Solo
Surface installation
Installation manual
1x frame for suface installation
frame holder set
3x dowels
3x screws
1x hex key
1x transparent name plate foil
Flush installation
Installation manual
1x frame for flush installation
frame holder set
4x screws
1x hex key
1x transparent name plate foil
2.2 Mechanical Installation
Mounting Types Overview
Refer to the table below for a list of mounting types and necessary components. You can
assemble multiple units in all mounting types.