2N IP Solo - Intercom Control; External User Control; Internal User Control

Installation manual 2N® IP Solo
60 / 74
3.2 Intercom Control as Viewed by External User
Quick Dial Buttons
Press the quick dial button on the main unit to dial the first position in the phone directory
(Phone Book).
By pressing the quick dial buttons you dial the phone numbers assigned to the particular Phone
Book position. Call setup is signalled by a long intermittent or any other tone depending on the
configuration of the PBX connected.
Repeated pressing of one and the same quick dial button during call setup may initiate call
hangup or call termination plus dialling the next phone number of the called subscriber, or may
be assigned no function; refer to theIntercom Configuration / Hardware / Keyboardsubsection
of Configuration Manual.
Calling to Phone Book Position
The2N
®
IP SoloPhone Book can contain up to 1999 programmable positions.
3.3 Intercom Control as Viewed by Internal User
Call Answering
You can answer the incoming calls to the2N
®
IP Solo intercom using your phone like any other
calls. You can unlock the door, activate/deactivate a user/profile via your phone keypad during
the call. The calls, however, are time-limited to avoid unintentional blocking of the2N
®
IP
Sololine. Set the maximum call duration in theCall time limit(refer tothe Intercom
Configuration / Services / Phone / Calls subsection of Configuration Manual). Press # on your
phone anytime to extend the call time. The automatic call termination is signalled with a short
beep 10 s before the call end.
Calling to 2N
®
IP Solo
2N
®
IP Soloallows you to answer incoming calls. Set the required parameters in the Incoming
calls group;refer totheIntercom Configuration / Services / Phone / Calls subsection of
Configuration Manual.
Door Opening (Switch Activation) by Code
2N
®
IP Solois equipped with a door unlocking switch. Enter the valid code (refer to the Intercom
Configuration / Hardware / Switches subsection of Configuration Manual) using your phone
keypad to activate this switch.