2N IP Solo - Flush Mounting Procedures; Flush Mounting in Bricks; Flush Mounting in Plasterboard

Installation manual 2N® IP Solo
27 / 74
•
•
•
•
•
•
•
•
Flush mounting – classic bricks
incl. hollow bricks, thermally insulated walls, etc.
What you need for mounting:
a properly cut hole as instructed in the box package
plaster, mounting glue, mounting foam or mortar as necessary
2N
®
IP Solo, flush mounting boxes (Part No. 9155017)
Flush mounting – plasterboard
What you need for mounting:
a properly cut hole as instructed in the box package
2N
®
IP Solo, flush mounting boxes (Part No. 9155017)
Flush mounting – plasterboard
What you need for mounting:
a properly cut hole as instructed in the box package
2N
®
IP Solo, flush mounting boxes (Part No. 9155017)