2N IP Style User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 64/105
125 kHz RFID Card Reader Module
The 125 kHz RFID card reader ( ) is one of the 2N IP Verso system Part No. 9155032
®
elements and is used for reading RFID card IDs in the 125 kHz band.
The module contains two bus connectors.2N IP Style
®
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
EM4xxx
Caution
We recommend that the M-Bus and LAN cables are not crossed but
carried separately through one bushing to increase the reading distance
of this reader if combined with a touch display in a single installation.

2N IP Style Specifications

General

Tamper Switch	Yes
Power Supply	12V DC
Ingress Protection	IP65
Inputs	2
Operating Voltage	12V DC
Speaker Impedance	8 Ohm