Door Opening (Switch Activation) by RFID Card
2N IP Style
®
is equipped with a door unlocking switch. To activate this switch, tap a
valid card or chip on the integrated card reader. Remember to complete the user
access card ID (refer to Subs. of the Configuration Manual for IP intercoms) 5.2.1 Users
to get an RFID card / chip access.
Procedure:
Tap a valid RFID card / chip on the integrated card reader located in the bottom
part of the device, whose symbol is backlit.
A valid RFID card / chip use is notified visually and by a continuous switch
activation tone or a predefined unlocking user sound. An invalid RFID card / chip
use is signaled acoustically or using a user sound.
Door Opening (Switch Activation) by Code
2N IP Style
®
is equipped with a door unlocking switch. Enter the valid code (refer to
Subs. of the Configuration Manual for IP Intercoms) using the touch 5.3.1 Switches
numeric keypad to activate this switch.
Procedure:
Enter the switch activating numeric code using the touch numeric keypad and
press the lock button for confirmation.
A valid code is notified visually and by a continuous switch activation tone or a
predefined unlocking user sound. An invalid code or interruption longer than as
defined in is signaled acoustically or using , Timeout for Entering Numbers
a user sound.
Door Opening (Switch Activation) by 2N ® Mobile Key
2N IP Style
®
is equipped with a door unlocking switch. Activate this switch using the
authentication (refer to Subs. of the Configuration 2N Mobile Key
®
5.4.5 Mobile Key
manual for IP Intercoms) in your smartphone. The application is available for devices
with iOS 12 and higher (iPhone 4s and higher) or Android 6.0 Marshmallow and higher
(Bluetooth 4.0 Smart supporting phones).
Procedure:
According to the authentication mode:
Touch mode – press or drag from left to right on the display
(depending on the Bluetooth authentication setting) to activate the switch.
Tap in app mode – unlock your smartphone, open the app and press the
To Next Page
Loading...
