3Com 3102 - Using Feature Codes

Using Feature Codes 109
3Com Business
Telephone
Most of the features that are listed in Table 9 are available on your 3Com
Business Telephone on single-purpose buttons like Hold, Conference,
Transfer, and Message, or on Access buttons that you or your
administrator can program.
Nevertheless, you can use feature codes if you like. On Models 1102,
2102, and 2102-IR, the top Access button directly below the Program
button is programmed at the factory as the Feature button for the 3Com
Business Telephone. On Model 3102, the top Access button in the left
column of 9 buttons is programmed at the factory as the Feature button.
(Your administrator can program another button as the Feature button.)
Using Feature
Codes
Follow these steps to use NBX feature codes:
1 Pick up the handset.
2 Press the Feature button.
3 Dial the feature code and any additional values as specified in Table 9
.
4 Hang up when your call is complete or you have activated the features
that you want.
Table 9 NBX Feature Codes
Feature Feature Code See
Account Codes F + 888 + account code + # + telephone
number
“Account (Billing) Codes” in Chapter 7
ACD, Hunt, and Calling
Groups
F + feature code for the group + group
password + #
“Automatic Call Distribution Groups,
Hunt Groups, and Calling Groups” in
Chapter 7
Call Forward All F + 465 “Forwarding Incoming Calls” in
Chapter 5
Call Forward Busy F + 467 “Forwarding Incoming Calls” in
Chapter 5
Call Forward No Answer F + 466 “Forwarding Incoming Calls” in
Chapter 5
Call Park — Park a Call F + 444 + one of the Call Park extensions
for your NBX system
“Call Park”in Chapter 7
Call Pickup — Directed F + 455 + the extension of the ringing
telephone
“Call Pickup” in Chapter 7
Call Pickup — Group F + 456 + call pickup group number “Call Pickup” in Chapter 7