74 CHAPTER 6: PERSONALIZING YOUR TELEPHONE
3 To disable Do Not Disturb mode, repeat steps 1 and 2. The DO NOT
DISTURB message disappears from the display panel.
To view your current Do Not Disturb setting even if you do not have a
3Com Telephone or if you are away from your desk, log in to NBX
NetSet > User Information > Feature Settings.
Preventing
Unauthorized Use
of Your Telephone
To prevent others from dialing long-distance or other unauthorized calls
from your telephone permanently, ask your administrator to adjust the
call permissions schedule for your extension, or you can adjust it
temporarily with the Telephone Locking feature.
Telephone Locking To enable and disable the Locking feature using the feature code:
1 Pick up the handset and press Feature + 432. The display panel on a
3Com Telephone prompts you to enter your password.
2 Enter your password +
# and hang up.
Your telephone is now locked. The display panel shows the Lock icon. It
displays only the directory and system-wide speed dials.
3 To turn off this feature, repeat steps 1 and 2. The Lock icon disappears.
Your call logs and personal speed dials are again available.
Additional Notes
■ When Telephone Locking is activated, a person using your telephone
can dial only toll-free calls, calls to emergency services (such as 911 in
the United States), or calls to telephone numbers that have been
programmed in your system as “internal” calls.
■ Even when Telephone Locking is active on your telephone, your
off-site notification choices remain in effect. That is, notification of
voice mail messages is sent to the outside telephone numbers or
paging numbers that you have specified in NBX NetSet > NBX
Messaging > Off-Site Notification, even if these numbers are not
toll-free.
■ You can view your current Telephone Lock setting by logging in to
NBX NetSet > User Information > Feature Settings.
To Next Page
Loading...