60 CHAPTER 5: STANDARD FEATURES
If the third party is internal and does not answer, the attempt to
conference that party is cancelled. You cannot establish a conference call
with an NBX user’s voice mailbox.
4 Repeat steps 2 and 3 to conference in a fourth party.
■ You can activate speaker phone operation during the conference call
by pressing the Speaker button.
■ You can turn off the microphone or the mouthpiece on the handset
by pressing the Mute or button. The other parties cannot hear
you, but you can hear them.
■ For details about the Speaker and Mute features, see “Telephone
Buttons and Controls” in Chapter 2 for the 3102 Business Telephone
or “Telephone Buttons and Controls”
in Chapter 3 for the 1102,
2102, and 2102-IR Business Telephones.
Disconnecting the
Last Person
That You Called
Use the Conference Drop feature to disconnect the last person that you
add to a conference call. This feature is helpful if, when you add a party,
your call is answered by someone else.
■ Only the person who added the last caller to the conference call can
drop that caller.
■ Your administrator can configure any Access button on a 3Com
Telephone or the Attendant Console to be a Conference Drop
button.
On a telephone that does not have a button programmed for Conference
Drop:
1 Press Feature + 431.
2 The system returns you to the others who are in the conference call.