3Com 3102 - 5 Standard Features

5
STANDARD FEATURES
This chapter describes standard features of the NBX® Telephones. It
covers these topics:
■ Answering a Call
■ Using the 3Com Telephone Display Panel
■ Dialing a Call
■ Forwarding Incoming Calls
■ Putting a Call on Hold
■ Transferring a Call
■ Direct Mail Transfer
■ Establishing a Conference Call
■ Setting the Volume
For help on accessing NBX features from an analog telephone, see the
NBX Feature Codes Guide in the NBX NetSet™ utility.
If your system uses a messaging application other than NBX Messaging,
use the documentation for your messaging application instead of the
instructions in this chapter.
Answering a Call To answer an incoming call, pick up the handset. If you are using a
3Com® Business Telephone, you can press the Speaker button. If you
have enabled Handsfree Active on Intercom, you can simply speak to
answer internal calls.
An unanswered call on any telephone on the NBX system is forwarded to
the call coverage point that you specify in NBX NetSet > User
Information > Call Forward Default or Call Forward Override. To
specify the number of times that your telephone rings before the call is