3Com 3102 - Paging

94 CHAPTER 7: GETTING MORE FROM YOUR TELEPHONE SYSTEM
If you select a Call Park extension that is already in use, Park Cancelled
appears on the display panel on your 3Com Telephone, and the call rings
back to your telephone. Try another Call Park extension.
To notify another user about the parked call:
■ From 3Com Business Telephones, select an Access button that is
assigned for placing telephone calls, and dial the user’s extension,
or use the paging feature. See “Paging”
next for details.
To retrieve a parked call:
1 Pick up the handset of any telephone on the system.
2 Dial the Call Park extension that was assigned to the call.
Paging Paging is the general term used to describe the act of broadcasting a
voice message through audio speakers.
You can:
■ Page all extensions with speakers on the system
This method uses default codes in Table 8
.
■ Page a subset of all extensions on the system, called a zone.
This method uses extensions that the administrator configures for this
purpose.
Each method allows you to broadcast a message to different destinations,
depending on your location and equipment.
Do not press the Feature button before you dial the Paging code.