Caller ID 81
To enter an account code for an outgoing external call:
1 Dial the phone number.
If an account code is required on a 3Com Entry Telephone or analog
telephone, you hear silence as the system waits for the required account
code.
If an account code is required on a 3Com Business, Basic, or Manager’s
Telephone, the display panel prompts you for the required account code.
2 Press the # key.
3 Dial the account code that has been assigned by your administrator, and
then press the # key.
The NBX system records the account code and completes the call:
■ The account name, if known, displays. If the account code is incorrect,
you are prompted to enter it again.
■ On a 3Com Entry Telephone or analog telephone, if the account code
is incorrect you may have to dial the phone number, press #, dial the
correct account code, and press # again.
To enter an account code at any time before or during an incoming or
outgoing call:
1 Press Feature + 888.
2 Dial the account code that has been assigned by your administrator, and
then press the # key.
The NBX system records the account code and applies it to:
■ The next call, if you activate the Account Codes feature before a call
arrives at your telephone
■ The current call, if you activate the Account Codes feature during a
call
Caller ID Your administrator can set up your NBX system to allow for Internal and
External Caller ID or can configure the system so that you can block your
identity (telephone number) from anyone you call.
Internal and External
Caller ID
By default, the NBX system shows the extension and name of any internal
caller on the display panel of your 3Com Telephone.
To Next Page
Loading...