CONTENTS
ABOUT THIS GUIDE
Conventions 7
Documentation Comments 8
Product Registration 8
1 INTRODUCING THE BASELINE SWITCH
Overview of the Baseline Switch 9
Features and Capabilities 9
Autosensing of MDI/MDIX Connections 9
Autonegotiating 10/100 Mbps Ports 9
Power-over-Ethernet Capability 10
Gigabit Combo Ports (RJ-45/SFP) 10
Physical Features 10
Front Panel 11
Rear Panel 15
Package Contents 16
2 INSTALLING THE SWITCH
Important Safety Information 17
Positioning the Switch 18
Rack-Mounting or Free-Standing 19
Using the Mounting Kit 19
Montagesatz Anweisungen 20
Placing Units On Top of Each Other 20
Supplying Power to the Switch 20
Checking for Correct Operation 21
Using SFP Tranceivers 22
Approved SFP Transceivers 22
Inserting an SFP Transceiver 22
Removing an SFP Transceiver 23
Performing Spot Checks 23
3 CONNECTING TO THE WEB INTERFACE
Requirements for Accessing the Web Interface 25
Using the Console Command Line Interface (CLI) 25
Logging On to the Web Interface 27
Navigating the Web Interface 28
Menu 28
Buttons 31
Port Status 31
Accessing the Switch using the 3Com Switch Detect
Application 31
Running the 3Com Switch Detect Application 32
4 CONFIGURING THE SWITCH FROM THE WEB INTERFACE
Configuration Overview 35
Device Summary Information 35
Administration Settings 37
Modifying the IP Address Settings 37
To Next Page
Loading...
Need help?
General