94 APPENDIX D: 3COM CLI REFERENCE GUIDE
Ping
The Ping command sends ICMP echo request packets to
another node on the network.
Syntax
ping [IP address | URL| hostname]
Parameters
■ IP Address — IP address to ping.
■ URL — URL address to ping.
■ hostname — hostname to ping. (Range: 1 - 158
characters)
Default Configuration
This command has no default configuration.
User Guidelines
There are no user guidelines for this command.
Example
The following displays the result of a Ping command:
Summary
The Summary command displays the current IP
configuration and software versions running on the
device. It is intended for devices that support separate
runtime and bootcode Images.
Syntax
Summary
Default Configuration
This command has no default configuration.
User Guidelines
There are no user guidelines for this command.
Example
The following displays current IP configuration and
software versions running on the device:
Select menu option: ping 192.168.1.9
Starting ping, resolution of displayed time is 10
milli-seconds.
Response from 192.168.1.9: TTL=128. time=20ms
Select menu option:
Select menu option: summary
IP Method: manual
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.254
Runtime version: 0.00.00.11
Bootcode version: 12.26.13.43
Select menu option:
To Next Page
Loading...
