3Com 3CBLSF50 - Baseline Switch 2250 User Manual

Administration Settings 43
System Name
Use these user definable fields to help identify your
switch.
Figure 26 System Name Screen
System Time
Click Administration, then System Time on the menu.
This screen allows you to set the system time. You can
set the Year, Month, Day, Hours, Minutes, and Seconds.
Figure 27 System Time Screen
SNMP
Simple Network Management Protocol (SNMP) is a
communication protocol designed specifically for
managing devices on a network. Equipment commonly
managed with SNMP includes switches, routers and
host computers. SNMP is typically used to configure
these devices for proper operation in a network
environment, as well as to monitor them to evaluate
performance or detect potential problems.
Click Administration, then SNMP on the menu. A screen
appears with three tabs:
■ Setup
■ SNMP Add
■ SNMP Remove
Setup
Enable or disable the SNMP Agent Status.
Figure 28 SNMP Setup Screen

3Com 3CBLSF50 - Baseline Switch 2250 Specifications

General

Brand	3Com
Model	3CBLSF50 - Baseline Switch 2250
Category	Switch
Language	English