Configuring Port Settings 65
Modify
Use the Modify tab to reassign member ports of a link
aggregation group.
Figure 59 Link Aggregation Modify Screen
To modify a link aggregation group:
1 Select the aggregation group to modify, then click
Select.
2 Select the ports to add to, and/or remove from, the
goup.
3 Click Apply.
Remove
Use the Remove tab to delete a link aggregation group.
Figure 60 Link Aggregation Remove Screen
To remove a link aggregation group:
1 From the link aggregation group list, select the
aggregated group to remove.
2 Click Remove.
To Next Page
Loading...
