Configuring Fast transition 161
Figure 35 Network diagram
Configuration Tasks Configuring fast transition in system view
Configuring fast transition in Ethernet port view
n
You can configure fast transition only on a root port or an alternate port.
port 1
port 2
Switch from another vendo
port 1
port 2
Switthc 8800
Switch from another vendo
Tab le 138 Configure fast transition in system view
Operation Command Description
Enter system view system-view -
Enable fast transition
stp interface interface-type
interface-number
no-agreement-check
Required
By default, port fast transition
is disabled.
Tab le 139 Configure fast transition in Ethernet port view
Operation Command Description
Enter system view system-view -
Enter Ethernet port view
interface interface-type
interface-number
-
Enable fast transition stp no-agreement-check
Required
By default, port fast transition
is disabled.
To Next Page
Loading...
