3Com 8807 - RMON Configuration Example

RMON Configuration Example 751
RMON Configuration
Example
Network requirements
Set an entry in RMON Ethernet statistics table for the Ethernet port performance,
which is convenient for network administrators’ query.
Network diagram
Figure 175 Network diagram for RMON configuration
Configuration procedure
# Configure RMON.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]interface Ethernet 3/1/1
[3Com-Ethernet3/1/1] rmon statistics 1 owner 3Com-rmon
# View the configurations in user view.
<SW8800> display rmon statistics Ethernet 3/1/1
Statistics entry 1 owned by 3Com-rmon is VALID.
Interface : Ethernet3/1/1<ifIndex.201326602>
etherStatsOctets : 0 , etherStatsPkts : 0
etherStatsBroadcastPkts : 0 , etherStatsMulticastPkts : 0
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length (etherStatsPktsXXXtoYYYOctets):
Tab le 698 Display and debug RMON
Operation Command
Display the RMON statistics display rmon statistics [ port-num ]
Display the history information of RMON display rmon history [ port-num ]
Display the alarm information of RMON display rmon alarm [ alarm-table-entry ]
Display the extended alarm information of
RMON
display rmon prialarm [ prialarm-table-entry ]
Display the RMON event display rmon event [ event-table-entry ]
Display the event log of RMON display rmon eventlog [ event-number ]
Internet
PCPC
PCPC
Cons ole Port
Network Port
Switch
Internet
PCPCPC
PCPCPCPC
Internet
PCPC
PCPC
Cons ole Port
Network Port
Switch
Internet
PCPCPC
PCPCPCPC