VRRP Configuration Example 661
Networking diagram
Figure 158 Network diagram for VRRP configuration
Configuration Procedure
Configure switch A
# Configure VLAN 2.
[LSW-A] vlan 2
[LSW-A-vlan2] interface vlan 2
[LSW-A-vlan-interface2] ip address 202.38.160.1 255.255.255.0
[LSW-A-vlan-interface2] quit
# Configure VRRP.
[LSW-A] vrrp ping-enable
[LSW-A] interface vlan 2
[LSW_A-vlan-interface2] vrrp vrid 1 virtual-ip 202.38.160.111
[LSW_A-vlan-interface2] vrrp vrid 1 priority 110
[LSW-A-vlan-interface2] vrrp vrid 1 preempt-mode
Configure switch B
# Configure VLAN2.
[LSW-B] vlan 2
[LSW-B-vlan2] interface vlan 2
[LSW-B-vlan-interface2] ip address 202.38.160.2 255.255.255.0
[LSW-B-vlan-interface2] quit
# Configure VRRP.
Virtual IP address: 202.38.1 60.111
Switch_A
Host A
202.38. 160.3
VLAN-interface2: 202.38.160.1
Internet
Switch_B
VLAN-int erface2: 202.3 8.160.2
V LAN-interface3: 10.100 .1 0.2
Host B
10.2.3.1
To Next Page
Loading...
