3Com 8807 - Displaying and Maintaining Static Multicast MAC Address Configuration

418 CHAPTER 38: STATIC MULTICAST MAC ADDRESS CONFIGURATION
Static Multicast MAC
Address Configuration
Example
Network requirements
■ Data packets with the destination MAC 0100-5e01-018d in VLAN 2 are to be
sent to three specified ports, Ethernet 2/1/1, Ethernet 2/1/2, and Ethernet
2/1/3.
Network diagram
Figure 101 Network diagram for static multicast MAC address configuration
Configuration procedure
# Enter system view
<SW8800> system-view
# Add a static multicast MAC address group, and add multiple ports into the static
multicast address group
[SW8800] mac-address multicast 0100-5e01-018d interface Ethernet 2/1/1 to
Ethernet 2/1/3 vlan 2
Displaying and
Maintaining Static
Multicast MAC
Address Configuration
Execute the display command in any view to display the user-configured multicast
MAC address.
Ethernet 2/1/1
Ethernet 2/1/2
Ethernet 2/1/3
Ethernet 3/1/1
Multicast
Ethernet 2/1/4
Ethernet 2/1/1
Ethernet 2/1/2
Ethernet 2/1/3
Ethernet 3/1/1
Multicast
Ethernet 2/1/4
Tabl e 410 Display a static multicast MAC address
Operation Command
Display static multicast MAC address
display mac-address multicast static [ [
mac-addr ] vlan vlan-id ]