Configuring a Super VLAN 63
These sub VLANs are isolated at Layer 2. It is required that these sub VLANs
communicate with one another at Layer 3.
Network diagram
Omitted
Configuration procedure
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] vlan 10
[3Com-vlan10] supervlan
[3Com-vlan10] vlan 2
[3Com-vlan2] port ethernet3/1/1ethernet3/1/2
[3Com-vlan2]arp proxy enable
[3Com-vlan2] vlan 3
[3Com-vlan3] port Ethernet3/1/3 ethernet3/1/4
[3Com-vlan3]arp proxy enable
[3Com-vlan3] vlan 5
[3Com-vlan5] port ethernet3/1/5 ethernet3/1/6
[3Com-vlan5]arp proxy enable
[3Com-vlan5] vlan 10
[3Com-vlan10] subvlan 2 3 5
[3Com-vlan10] interface vlan 10
[3Com-Vlan-interface10] ip address 10.110.1.1 255.255.255.0
To Next Page
Loading...
