Function Features 19
MPLS
L3 multiprotocol label switching (MPLS) VPN (option1/2/3),
embedded MPLS VPN, hierarchical PE (HoPE), CE dual
homing, MCE, and multi-role host
VLL, including Martini, Kompella and CCC modes
VPLS
Quality of service (QoS)
Supports different types of traffic classification, including
port-based, VLAN-based, COS priority-based, IP
address-based, TOS priority-based, DSCP priority-based,
TCP/UDP port-based, protocol type-based, and class of
service (CoS)-based traffic classification
Traffic supervision. The granularity is 8 Kbps
Traffic shaping
Priority mark/Remark
Queue scheduling: supports strict priority queuing (SP),
weighted round robin (WRR), and SP+WRR
Congestion avoidance algorithms Tail-Drop and WRED
Supports up to eight priority queues per port
Security features
Multi-level user management and password protection
Password control
802.1X authentication
Packet filtering
Port-based receiving broadcast frame control and supports
rate calculation in terms of bytes or packets
Guards against attack through anti-virus protocol packets,
such as DOS attack
AAA/RADIUS/HWTACACS
SSH 2.0
Firewall Application Module and IPsec Application Module
Portal
Accounting of education networks
Dedicated service processing Netstream
QinQ
Port-based VLAN VPN
Selective QinQ
Table 1 Function features
Features Implementation
To Next Page
Loading...
