218 CHAPTER 24: VLAN-ACL CONFIGURATION
# Define traffic classification rules for packets , and allow packets to pass during
the specified time period.
[3Com-acl-basic-2000] rule 0 permit source any time-range 3Com
[3Com-acl-basic-2000] quit
3 Configure packet redirection in VLAN 2.
# Set the next hop IP addresses of all the packets forwarded on ports in VLAN 2 to
3.0.0.1.
[SW8800] vlan 2
[3Com-vlan2] traffic-redirect inbound ip-group 2000 rule 0 next-hop
3.0.0.1
4 View configuration.
# View whether VLAN-ACL is configured on all ports in VLAN 2 (ports
GigabitEthernet7/1/1 and GigabitEthernet7/1/2).
[3Com-vlan2] display vlan-acl-member-ports vlan 2
Vlan-acl member port(s):
GigabitEthernet7/1/1 GigabitEthernet7/1/2
To Next Page
Loading...
