372 CHAPTER 33: BGP CONFIGURATION
Configuring route filtering policy based on IP ACL for a peer (group)
Configuring route filtering policy based on AS path list for a peer (group)
The acl-number argument indicates AS path list number, which is configured by
means of the ip as-path-acl command instead of the acl command. For the
detailed configuration, refer to
“IP Routing Policy Configuration”.
Configuring route filtering policy based on address prefix list for a peer
(group)
By default, route filtering based on address prefix list for a peer (group) is disabled.
Remove the egress route policy of a peer
group
undo peer group-name route-policy
route-policy-name export
Tabl e 366 Configure route filtering policy based on IP ACL for a peer (group)
Operation Command
Configure the ingress route filtering policy
based on IP ACL for a peer (group)
peer { group-name | peer-address }
filter-policy acl-number import
Remove the ingress route filtering policy
based on IP ACL of a peer (group)
undo peer { group-name | peer-address }
filter-policy acl-number import
Configure the egress route filtering policy
based on IP ACL for a peer (group)
peer group-name filter-policy acl-number
export
Remove the egress route filtering policy based
on IP ACL for a peer (group)
undo peer group-name filter-policy
acl-number export
Tabl e 367 Configure route filtering policy based on AS path list for a peer (group)
Operation Command
Configure the ingress route filtering policy
based on AS path list for a peer (group)
peer { group-name | peer-address }
as-path-acl acl-number import
Remove the ingress route filtering policy
based on AS path list of a peer (group)
undo peer { group-name | peer-address }
as-path-acl acl-number import
Configure the egress route filtering policy
based on IP ACL for a peer group
peer group-name as-path-acl acl-number
export
Remove the egress route filtering policy based
on IP ACL for a peer group
undo peer group-name as-path-acl
acl-number export
Tabl e 368 Configure route filtering policy based on address prefix list for a peer (group)
Operation Command
Configure the ingress route filtering policy
based on address prefix list for a peer (group)
peer { group-name | peer-address } ip-prefix
prefixname import
Remove the ingress route filtering policy
based on address prefix list of a peer (group)
undo peer { group-name | peer-address }
ip-prefix prefixname import
Configure the egress route filtering policy
based on address prefix list for a peer group
peer group-name ip-prefix prefixname
export
Remove the egress route filtering policy based
on address prefix list for a peer group
undo peer group-name ip-prefix prefixname
export
Table 365 Configure route policy for a peer (group)
Operation Command
To Next Page
Loading...
