488 CHAPTER 45: MSDP CONFIGURATION
[SwitchA-msdp] originating-rp loopback0
[SwitchA-msdp] quit
# Configure C-RP and BSR.
[SwitchA] pim
[SwitchA-pim] c-rp loopback 10
[SwitchA-pim] c-bsr loopback 10 30
MSDP Integrated
Networking
Network requirement
In the following network, enable MSDP and configure an Anycast RP in PIM-SM
domain 1; establish MSDP peer relationship among RPs across PIM-SM domains;
and use MBGP between domains. For the related commands, refer to 9.4
“MBGP
Multicast Extension Configuration Example”.
Network diagram
Figure 118 MSDP integrated networking
Configuration procedure
n
The follow procedure details multicast configuration, but briefs router
configuration.
1 Configure Switch A:
# Configuring VLAN
SRC A
Vlan-interface30
Vlan-interface20
Vlan-interface10
PIM-SM domain 4
Loopback10
10.1.1.1
Loopback0
10.25.1.1
Loopback0
10.25.1.2
Ethernet: 10.25.2.0
Loopback0
10.26.1.1
Loopback0
10.28.1.1
Loopback0
10.29.1.1
Vlan-interface20
Vlan-interface10
SwitchI
PIM-SM domain 3
SwitchH
PIM-SM domain 2
SwitchG
SwitchA
PIM-SM domain 1
SwitchB
SwitchC
SRC B
SwitchD
Loopback0
10.27.1.1
SRC C
Ethernet: 10.26.2.0 Ethernet: 10.27.2.0
SwitchE
Loopback0
10.26.1.2
Loopback10
10.1.1.1
SwitchF
Loopback0
10.27.1.2
Loopback10
10.1.1.1
Loopback0
10.30.1.1
Vlan-interface10
E1/1/2
E1/1/3
E1/1/2
E1/1/3
E1/1/4
Vlan-interface30
SRC A
Vlan-interface30
Vlan-interface20
Vlan-interface10
PIM-SM domain 4
Loopback10
10.1.1.1
Loopback0
10.25.1.1
Loopback0
10.25.1.2
Ethernet: 10.25.2.0
Loopback0
10.26.1.1
Loopback0
10.28.1.1
Loopback0
10.29.1.1
Vlan-interface20
Vlan-interface10
SwitchI
PIM-SM domain 3
SwitchH
PIM-SM domain 2
SwitchG
SwitchA
PIM-SM domain 1
SwitchB
SwitchC
SRC B
SwitchD
Loopback0
10.27.1.1
SRC C
Ethernet: 10.26.2.0 Ethernet: 10.27.2.0
SwitchE
Loopback0
10.26.1.2
Loopback10
10.1.1.1
SwitchF
Loopback0
10.27.1.2
Loopback10
10.1.1.1
Loopback0
10.30.1.1
Vlan-interface10
E1/1/2
E1/1/3
E1/1/2
E1/1/3
E1/1/4
Vlan-interface30
To Next Page
Loading...
