Isolate-user-VLAN Configuration Example 69
# Configure the mapping relationship between the isolate-user-VLAN and the
Secondary VLANs.
[3Com-vlan2] quit
[SW8800] isolate-user-vlan 5 secondary 2 to 3
2 Configuration on Switch C
# Configure an isolate-user-VLAN.
<SW8800>system-view
[SW8800] vlan 6
[3Com-vlan6] isolate-user-vlan enable
[3Com-vlan6] port ethernet2/1/1
# Configure Secondary VLANs.
[3Com-vlan6] vlan 3
[3Com-vlan3] port ethernet2/1/3
[3Com-vlan3] vlan 4
[3Com-vlan4] port ethernet2/1/4
# Configure the mapping relationship between the isolate-user-VLAN and the
Secondary VLANs.
[3Com-vlan4] quit
[SW8800] isolate-user-vlan 6 secondary 3 to 4
To Next Page
Loading...
