3-27
e Figure 3-49 Bind the radio to the wireless service and enable the wireless servic
z Click the Bind link in the Wireless Service column, select the target radio, and click Bind.
z Select the 11nservice check box.
z Click Enable.
4) Enable 802.11n (2.4GHZ) radio (By default, 802.11n (2.4GHZ) radio is enabled. Therefore, this
step is optional. )
Select Radio > Radio from the navigation tree to enter the Radio page. Make sure that 802.11n
(2.4GHZ) is enabled.
Figure 3-50 Enable the radio
Configuration verification
z Select Summary > Client from the navigation tree to enter the page displaying online clients, as
shown in
Figure 3-51.
To Next Page
Loading...
