3Com Baseline 2226-PWR Plus - Discovery Application Steps; Selecting Network Adapter; Identifying the Switch; Logging On to the Web Interface

24 CHAPTER 3: CONNECTING TO THE WEB INTERFACE
Figure 5 Welcome Screen of Discovery
2 If the computer has multiple network adapters, select
the adapter that connects the computer to the
Switch, and then click Next.
If the computer has only one adapter, click Next.
Discovery searches the network for 3Com devices.
When detection is complete, the Discovered Devices
screen displays detected network devices.
Figure 6 Discovered Devices Screen
3 On the Discovered Devices screen, click Baseline
Switch 2226-PWR Plus, and then click Next.
The Completing the 3Com Discovery Application
screen appears.
4 Click Finish.
The Web interface loads in your Web browser.
Logging On to the Web Interface
After the Web interface loads in your Web browser,
the first page that appears is the logon screen. On
this screen, you need to enter the administration user
name and password to gain access to the Web inter
-
face.