Accessing the Interface Without Using Discovery 27
DHCP Assigned IP Address
If you set the IP address mode to DHCP, check the
DHCP server for the IP address that is assigned to the
Switch, and then use that IP address to access the
Web interface.
For example, if the DHCP server assigned the IP
address 192.168.0.123 to the Switch, start your Web
browser, and then type
http://192.168.0.123.
Manually Assigned (Static) IP Address
If you assigned a static IP address to the Switch, you
need to use that IP address to access the Web inter
-
face the next time you want to configure the Switch.
For example, if you assigned the Switch the IP address
192.168.0.123, start your Web browser, and then
type
http://192.168.0.123.
To Next Page
Loading...
