3D Systems, Inc. p/n 77-D005 Rev_A
2 INTRODUCTION TO THE MQC
PROX® MATERIAL QUALITY CONTROL (MQC) SYSTEM
The ProX® MQC Single Use System is designed to be used as the material handling unit for the ProX® SLS 6100 SLS line of
printers . It is responsible for delivering material to the printer, storing and mixing fresh and used material, and breaking out
the SLS parts from the print cake which is produced by the printer .
SLS Single MQC System – Front View
Power Switch: This switch enables and disables power to the ProX® MQC Single User System .
Blended Material Bin: Material which is a combination of used material and fresh material is stored for production use
in this hopper . The system handles this automatically .
Fresh Material Input: Fresh material is loaded at this location . The user must scan the RFID tag on the container across
the RFID reader . .
RFID Reader: The RFID reader is used to scan the RFID tag of the material container . This ensures that the system keeps
track of material quantity and fresh-to-new powder ratios . The tag must be scanned to unlock the Fresh Material input
doors and add the material to the system .
To Next Page
Loading...
Need help?
General
