3D Systems ProX User Manual

3D Systems, Inc. p/n 77-D005 Rev_A
Breakout Area: The print cake is brought here using the Print Transfer Cart Assembly .
Reject Chute: Spent material (as determined by the user) is loaded into the reject chute .
Thermocouples: Two temperature gauges for the print cake are used to determine whether or not the print cake has
cooled sufficiently before breaking out the parts.
Nitrogen Blanket: This lid is placed on top of a filled print cake cylinder to control the cooldown of the print cake using
nitrogen .
Stowaway Area: Underneath the breakout area, there is a space which can be used to store part extraction cylinders
when they are not in use .
Sifter: The user removes the parts from the print cake in the breakout area and places the material for reuse into the
sifter .
SLS Single MQC System Operator Controls: User interface for operation of the SLS Single MQC System .
I
E
A
B
C
D
F
G
H
E
F
G
H
I
J
K

3D Systems ProX Specifications

General

Brand	3D Systems
Model	ProX
Category	3D Printers
Language	English