North American - ENG
Date Released:
October 2018
3M-Matic
™
8000af - Type 11800
Page 30
44-0009-2153-4 / ECO# 0078045
Figure 11-9 Box Size Setup
Figure 11-8
Important – Be sure all packaging materials and
tools are removed from machine
before operating.
Turn air On/O valve to "On" (SUP) position.
Press electrical "On" button to start drive belts.
Place box at infeed end of machine and push into
machine until it is taken away by drive belts.
Figure 11-9
Adjust compression rollers. Run box through
machine and stop when adjacent to compres-
sion rollers.
Move compression rollers in to press box top
aps rmly together.
Restart machine to exit box
• To reduce the risk associated with
pinch hazards:
− Keep hands clear of the upper head support
assembly as boxes are transported through
the machine.
− Keep hands, hair, loose clothing, and
jewelry away from box compression rollers.
− Always feed boxes into the machine by
pushing only from the end of the box.
− Keep hands, hair, loose clothing, and jewelry
away from moving belts and taping heads.
Caution
Press "ON" Button
to Start Machine
Figure 11-8 Box Size Setup
11. Operation (continued)
To Next Page
Loading...
