8 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-39373B
WARNING
To avoid the risk of electric shock which could result in serious injury or death:
• Do not expose the display to rain or other sources of water, steam, or moisture.
• Do not place foreign objects on the display or its cables.
• Do not remove the cover or back of the display.
• Ensure that connecting the unit to the power source will not overload the power
source.
CAUTION
To avoid the risk of glass breakage which may result in minor or moderate injury:
• To avoid risk of injury when handling the display be aware that the sensor edges
may be sharp.
• Handle the display with care to avoid breaking the touch sensor. The display
contains glass parts. Dropping the display may cause the glass parts to break.
• Ensure mounting screws are tightened fully to prevent instability.
• Do not place foreign objects on the display.
• Do not use a visibly damaged or broken sensor.
• Ensure that mounting the unit will not adversely affect the stability of the end
equipment when installing in free standing equipment or using the VESA mount.
To avoid the potentially hazardous situations associated with the use of alcohol or
other solvents which may result in minor or moderate injury or property damage:
• Follow all instructions and recommendations in the manufacturer's Material Safety
Data Sheet and product label.
• Be sure to follow solvent manufacturer's precautions and directions for use when
using any solvents
• It is important to avoid using any caustic chemicals on the touch sensor.
To avoid possible environmental contamination which may result in minor or
moderate injury:
• Dispose of the flat panel display according to applicable governmental regulations.
NOTICE
To avoid the risk of potential damage to the display electronics:
• Always use the VESA 200 mm mounting holes when using an arm attachment. Do
not drill additional holes in the unit to mount plates other locations
• Do not use longer screws as they could potentially damage electronics inside the
display.