Need help?Do you have a question about the 3M Performance Spray Gun and is the answer not in the manual?
General| Operating Pressure | 20 PSI |
|---|---|
| Feed Type | Gravity Feed |
| Material Compatibility | Paints, Primers |
| Nozzle Sizes | 1.2 mm, 1.3 mm, 1.4 mm, 1.8 mm |
| Air Inlet | 1/4 inch |
| Material | Aluminum, stainless steel, Teflon |
| Weight | 442 g |
| Air Consumption | 13 SCFM |
To Next Page
