ENGLISH
1
ORIGINAL
EU Declaration of Conformity
Automotive Aftermarket Division
3M Center, Building 223-6N-01
St Paul, MN USA 55144-1000
Does hereby declare under our sole responsibility that this equipment or product(s) comply with the applicable
essential requirements of the legislation listed below; along with the referenced standards or specifications.
Object - Product name and/or model number(s) and/or unique identification:
“Performance Spray Gun”
Type and/or description and/or intended purpose or equipment class and/or
particular conditions applicable to the use of the Object:
Part numbers: 26978, 26878, 26778, 26832, and all kit products which include
these part numbers
Serial number or range (if applicable):
Year of manufacture: “20ab”–to–“2099”, where “ab” is any 2-digit number.
Conforms to the following Union harmonization legislation; together with all amendments to-date:
Machinery Directive 2006/42/EC, ATEX Directive, 2014/34/EU
Standards / specifications / provisions complied with; in full or in part as applicable:
Safety of machinery. General principles for design. Risk assessment and risk
reduction
Atomizing and spraying equipment for coating materials. Safety requirements
Surface treatment equipment. Noise test code for surface treatment
equipment including its ancillary handling equipment. Accuracy grades 2 and 3
Explosive atmospheres - Part 36: Non-electrical equipment for explosive
atmospheres - Basic method and requirements
•
II 2G Ex h IIB T4
Vice President and Technical Director
Person authorized to compile the technical file, established in the Community
Florent Gumery, Director Sce Tech.,
AAD Reg & Ctry Application Engineering
3M Beauchamp France, 1 Avenue Boule, Parc Barrachin,
Beauchamp Val-d’Oise, 95250, France +33-130402581
To Next Page
Loading...
