3S n8072 - SMTP (Mail Server Setting)

N8072 Cube Network Camera 2 Megapixel + H.264
- 63 -
SMTP (Mail Server Setting)
N8072 Cube Network Camera provides you to transmit images to a particular email
address when a motion detection event occurred or a sensor is triggered.
A mail server setting for the camera is required, if you want to use this function.
 SMTP Setting
Enter the following information sequential to complete the settings as below:
SMTP server: The SMTP server IP address.
SMTP From: The email of the sender, i.e. xxx@xxx.com
SMTP Authentication: Enables/disables
User name: The user name is from SMTP server.
Password: The password is from SMTP server.
NOTE：
N8072 Cube Network Camera support the mail account of SSL (Secure Sockets Layer)
cryptographic protocol only, and the normal free webmail service belong the TLS
(Transport Layer Security) cryptographic protocol.