Working with the 3ware BIOS Manager (3BM)
www.3ware.com 39
Specify (or unspecify) a drive as a
hot spare
S
Unlock the drives in a unit, so that
they can be removed and used with
a controller other than a 9000-series
controller.
R (Remove)
Return to starting values for this
session in the 3ware BIOS Manager
F6
Note: F6 cannot bring back
previous policy settings; they
are saved when you exit the
Policy screen.
Display the Advanced Detail screen,
where you can see the software
versions (BIOS, Firmware, monitor),
serial number, controller and model
number, cache memory size, slot #
of the 3ware card, and whether or
not BBU-support is available.)
Shift+F5
Return to the main 3ware BIOS
Manager screen, from the Advanced
Details screen
Any key
Move a highlighted unit up or down
in the list of exportable units
(The top-most unit will become the
bootable unit, if you install the OS.)
Page Up
Page Down
[Available only when there are
multiple units and a unit is
highlighted.]
Display context sensitive help F1 or Alt+F1
If you have multiple 3ware
controllers in your system, return to
the board selection screen.
Esc
Table 4: Working in 3BM
To do this Use these keys
To Next Page
Loading...
