Driver Installation Under Linux
www.3ware.com 47
6 Load the kernel driver module manually. Type:
modprobe sd_mod
insmod 3w-9xxx
You can also incorporate the insmod command into a startup script.
Driver Installation Under SuSE Linux
Materials required
• 3ware software CD-ROM
• Floppy diskette, if you need to make a driver install diskette.
• SuSE Linux Installation CD-ROM/DVD (Not required if SuSE Linux is
already installed on another drive.)
Creating a SuSE Linux Driver Diskette
If you are installing Linux on the new drive or unit managed by the 3ware
RAID controller, you must create a 3ware driver install diskette. If Linux is
already installed on another device, you may install the 3ware kernel driver
module from the 3ware software CD-ROM.
To create a driver install diskette
1 Insert the 3ware software CD into your system.
2 When the 3ware Escalade Menu appears, click Driver and Firmware
Disks.
3 In the 3ware Driver and Firmware Disk Images menu, click the button for
the driver disk you want to create.
A confirmation window opens.
4 Insert a blank diskette into a drive and click the Yes button to begin
copying the driver to the floppy diskette.
Note: If you need to create a Linux driver diskette for a Linux distribution other that
what is available on the menu, see 3ware knowledgebase article 14546
http://www.3ware.com/KB/article.aspx?id=14546
To Next Page
Loading...