a-eberle REG-DA - H2 (Hydrogen) in Oil Content; CO (Carbon Monoxide) in Oil Content

Page 38
Page 38
SETUP
LEREF "Verzeichnis Ueberschrift" \* MERGEFORMAT Index
Fehler! Verwenden Sie die Registerkarte 'Start', um Verzeichnis Ueberschrift
dem Text zuzuweisen, der hier angezeigt werden soll.Contents
We take care of it.
Switching delay
Defines the switch-on delay for the alarm signal.
Setting range: 0...900 s
Hysteresis
Defines the hysteresis for the switching point.
Setting range: 1...100000 ppm
H2 (Hydrogen) in Oil content 5.6.3
Limit value
Defines the switch-on point for the alarm signal.
Setting range: 0...1000000 ppm
Switching delay
Defines the switch-on delay for the alarm signal.
Setting range: 0...900 s
Hysteresis
Defines the hysteresis for the switching point.
Setting range: 1...100000 ppm
CO (Carbon Monoxide) in Oil content 5.6.4
Limit value
Defines the switch-on point for the alarm signal.
Setting range: 0...1000000 ppm