SETUP
LEREF "Verzeichnis Ueberschrift" \* MERGEFORMAT Index
Fehler! Verwenden Sie die Registerkarte 'Start', um Verzeichnis Ueberschrift
dem Text zuzuweisen, der hier angezeigt werden soll.Contents
Operating time mom. (IEC)
This is where the IEC-based operating hours (loss of life) are adjusted.
Setting range: 0...999999 h
Lifetime Tap changer 5.7.2
Switching load
This is where the current switching load for the tap changer is adjusted.
Setting range: 0...9000000 A
2
s
Operating time maximal
Press <F4> to enter the expected maximum service life (see the manufacturer's data).
Setting range: 0...999999 h
Operating time mom.
The 'Current operating hours' parameter is important if the system is not installed at the
same time as the tap changer. Both parameters may need to be adjusted in conjunction
with revisions.
Setting range: 0...999999 h
Lifetime Oil pump 5.7.3
After entering the menu there are the settings for oil
pump one shown. The values for oil pump two can be
reached by pressing the <F1> button.
Operating time maximal
Press <F4> to enter the expected maximum service life (see the manufacturer's data) for
the oil pumps.
Setting range: 0...999999 h
To Next Page
Loading...