66
DISCHARGE PIPE
TEMPERATURE-PRESSURE
RELIEF VALVE
NOTE:
DO NOT PLUG THE TEMPERATURE-PRESSURE RELIEF
VALVE OPENING. THIS CAN CAUSE PROPERTY DAMAGE,
SERIOUS INJURY OR DEATH.
Explosion Hazard
Temperature-Pressure Relief Valve
must comply with ANSI Z21.22-
CSA 4.4 and ASME code.
Properly sized temperature-
pressure relief valve must be
installed in opening provided.
Can result in overheating and
excessive tank pressure.
Can cause serious injury or death.
VENT SYSTEM
NOTE:
TABLE 15
UN-LIME® PROFESSIONAL DELIMER
Part Number Description
9005416105
9005417105 1 - 5 gallon
POWERED ANODE RODS
NOTE:
DRAIN VALVE AND ACCESS PANELS
TEMPERATURE-PRESSURE RELIEF VALVE TEST
Burn hazard.
Hot water discharge.
Keep clear of Temperature-
Pressure Relief Valve
discharge outlet.
To Next Page
