Aaeon UP-CHT01 - Page 29

Chapter 3 – AMI BIOS Setup 18
Maker Board UP-CHT01
3. Open the
Setup.exe
file in the folder
4. Follow the instructions
5. Drivers will be installed automatically
Step 4 – Install Dummy Driver*
1. Open the
Step4 - Dummy Driver (Manual)
folder
2. Extract the
UP_DDriver.rar
file to a new folder
3. Open the
Install_Dummy_Driver_on_UP.docx
file in the new folder
4. Follow the instructions to manually update the driver
* Some virtual devices required for Linux to function properly will appear as unknown
devices in Windows Device Manager. Updating these devices with the dummy driver
will resolve the problem.